|
| Displaying 118 to 126 (of 188 new products) |
Result Pages: 14 |
US$118.00
Date Added: Tuesday 07 October, 2014
Manufacturer:
This heavy duty DC actuator has a stroke length
of 150mm with a peak force of 350N and a peak speed of 24 mm/s.
DC Linear Actuator P5H-24-150mm
This heavy duty DC actuator has a stroke length
of 150mm with a peak force of 350N and a peak speed of 24 mm/s.
Description
Specifications
Resources
The Sinokoko P5H series of linear actuators
are high-torque DC motors geared to push or pull a load along the
stroke of the actuator. This actuator comes with a built-in potentiometer,
allowing your application to monitor the actuator's position.
The 3545 linear actuator has a stroke length of 150mm, can move at
a rate of 24 mm/s and can extert up to 350N of force at lower speeds.
The linear actuator is an alternative to designing with gea...
|
|
|
Date Added: Tuesday 07 October, 2014
Manufacturer:
US$82.60
This servo actuator has a stroke length of 100mm
with a peak force of 23N and a peak speed of 12 mm/s.
RC Linear Actuator L12-100-100-06-R
This servo actuator has a stroke length of 100mm
with a peak force of 23N and a peak speed of 12 mm/s.
Description
Specifications
Resources
The L12 Linear Actuator is an axial design with a powerful drivetrain
and a rectangular cross section for increased rigidity.
The L12 actuator is designed to move push or pull loads along its
full stroke length. The speed of travel is determined by the gearing
of the actuator and the load or force the actuator is working against
at a given point in time. When power is removed, the actuator stops
moving and holds its position, unless the applied load exceeds the
...
|
|
|
US$11.65
Date Added: Monday 06 October, 2014
Manufacturer:
Detect a touch through up to 1/2" of glass or plastic with this low-cost capacitive sensor.
Touch Sensor
Detect a touch through up to 1/2" of glass or plastic with this low-cost capacitive sensor.
Description
Specifications
Resources
Code Sample
The 1129 is a capacitive touch sensor and can detect a touch through
plastic, glass, or paper. We recommend a material thickness of up
to 1/2".
The sensor can work as a close proximity sensor, sensing objects at
a distance of up to 1/2¡¨ from the board in all directions without
direct contact.
On the bottom side of the Touch Sensor there is a small exposed metallic
pad. A soldered connection can be made to the pad to increase the
size and dimensions o...
|
|
|
Date Added: Monday 06 October, 2014
Manufacturer:
US$40.71
This touch sensor recognizes both contact and proximity and can be used as a scroll wheel or a series of buttons. Connects directly to a USB port.
PhidgetCircularTouch
This touch sensor recognizes both contact and proximity and can be used as a scroll wheel or a series of buttons. Connects directly to a USB port.
Description
Specifications
Resources
Code Sample
The PhidgetCircularTouch detects changes in the
capacitance between the on-board electrodes and the object making
contact. The side of the circuit board opposite the connector and
components is the side intended for contact.
The 1016 can be mounted behind a sheet of glass or plastic; The recommended
thickness is 1/8 inch. Use Silicon adhesive when attaching the Phidget
to the materi...
|
|
|
US$73.75
Date Added: Monday 06 October, 2014
Manufacturer:
This humidity sensor can measure the relative humidity in the environment from 10% to 95% RH. Connects to an analog input.
Relative Humidity Sensor HM1500LF
This humidity sensor can measure the relative humidity in the environment from 10% to 95% RH. Connects to an analog input.
Description
Specifications
Resources
Connection
The 1130 is a dedicated humidity transducer designed for applications
where a reliable and accurate measurement is needed.
Its features:
Small size product
Product free from Lead, Cr(6+), Cd and Hg
Humidity calibrated within ±2% @55%RH
Ratiometric to voltage supply
Patented solid polymer structure
High reliability and long term stability
Not affected by water immersion
Very low temperature dependence
Instantan...
|
|
|
Date Added: Monday 06 October, 2014
Manufacturer:
US$14.16
This K-Type thermocouple measures temperatures from -40¢XC to 400¢XC and connects to a Phidgets thermocouple board.
K-Type Fiberglass Bead Probe Thermocouple (-40°C to
+400°C)
This K-Type thermocouple measures temperatures from
-40°C to 400°C and connects to a Phidgets thermocouple board.
Description
Specifications
Related Products
Connection
The 3109 - K-Type thermocouple can measure temperatures
between -40°C to +400°C with a 0.75°C accuracy.
The thermocouple wire is insulated with fiberglass.
Sensor Properties
Sensor Type
Thermocouple
...
|
|
|
US$5.90
Date Added: Monday 06 October, 2014
Manufacturer:
This K-Type thermocouple measures temperatures from -40¢XC to 200¢XC and connects to a Phidgets thermocouple board.
K-Type Bead Probe Thermocouple (-40°C to
+200°C)
This K-Type thermocouple measures temperatures from
-50°C to 200°C and connects to a Phidgets thermocouple board.
Description
Specifications
Related Products
Connection
The 3107 - K-Type thermocouple can measure temperatures
between -40°C to +200°C with a 0.75°C accuracy.
Sensor Properties
Sensor Type
Thermocouple
Temperature Sensor
...
|
|
|
Date Added: Monday 06 October, 2014
Manufacturer:
US$46.17
This simple force sensor can be used as a button for
human input or to sense the presence of a small object.
Motion Sensor
Sensing changes in IR light, this sensor detects
movement in a small room or hallway and connects to an analog input.
Description
Specifications
Resources
Code Sample
The 1111 detects changes in infrared radiation that occur when there
is movement by a person (or object), which is different in temperature
from the surroundings. As this sensor detects temperature differences,
it is well suited to detecting the motion of people by their body
temperature.
This sensor is also characterized by a narrow sensing area..
Comes Packaged with:
3002 60cm Sensor Cable
...
|
|
|
US$14.75
Date Added: Monday 06 October, 2014
Manufacturer:
This simple force sensor can be used as a button for
human input or to sense the presence of a small object.
Vibration Sensor
The vibration sensor uses a piezoelectric element
to measure vibration on a surface and connects to an analog input.
Description
Specifications
Resources
Code Sample
This sensor buffers a piezoelectric transducer. As the transducer
is displaced from the mechanical neutral axis, bending creates strain
within the piezoelectric element and generates voltages.
If the assembly is supported by its mounting points and left to vibrate
¡§in free space¡¨ the device will behave as a form of vibration sensor.
The sensing element should not be treated as a flexible switch, and
is not intended to be bent.
...
|
|
|
|
| Displaying 118 to 126 (of 188 new products) |
Result Pages: 14 |
|
|
|
