This board has 2 SPDT mechanical relays rated at 240VAC/10A or 100VDC/5A. SSR Relay Board 2.5A This board has 2 SPDT mechanical relays rated at 240VAC/10A or 100VDC/5A. Description Specifications Resources Code Sample Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. By simply providing a small voltage to the control side of the circuit, you can open or close a higher powered circuit on the load side. The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of an LED paired with a set of optically-contr...

Control 8 DPDT mechanical relays, switching up to 250VAC/2A. PhidgetInterfaceKit 0/0/8 Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp. Description Specifications Resources Code Sample The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum of 60 Watts. While typical mechanical relay boards are unable to switch signals due to an oxide buildup on the contacts, the 1017 excels at switching both signals and low-power applications.The 1017_2 can be connected via USB, or to a VINT Hub using a Phidget cable. Please Note: These relays cannot be switched at maximum current and maximum voltage at the same time. Ensure that the total ...

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.35° step angle and 18 kg·cm of torque at low speeds. 42STH38 NEMA-17 Bipolar Stepper with 5.18:1 Gearbox This bipolar stepper with a rear shaft and a planetary gearbox has a 0.35° step angle and 18 kg·cm of torque at low speeds. Description Specifications Resources Connection This NEMA-17 motor has an integrated Planetary gearbox with a 52/11:1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. When connected to a 1067 - PhidgetStepper Bipolar HC, the 3325 has a maximum speed of approximately 900 RPM. At the output of the gearbox, the step angle is a little under 0.35°. When using the step angle ...

This tiny stepper with a rear shaft has a 1.8¢X step angle and 520 g¡Pcm of torque at low speeds. 28STH32 NEMA-11 Bipolar Gearless Stepper Motor This tiny stepper with a rear shaft has a 1.8° step angle and 520 g·cm of torque at low speeds. Description Specifications Resources Connection This NEMA-11 motor generates 600 g-cm of holding torque at 0.67 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler . When connected to a 1067 - PhidgetStepper Bipolar HC, the 3320 has a maximum speed of approximately 426 RPM. ...