TchineseEnglish
Your cart contains 0 items
New Products
Displaying 100 to 108 (of 188 new products) Result Pages: [<< Prev]  ... 11  12  13  14  15 ...  [Next >>] 
Small Heatsink for SSR
  US$11.21
Date Added: Wednesday 08 October, 2014
Manufacturer:


Use this heatsink to run one SSR at full current switching capacity without overheating. Small Heatsink for SSR Use this heatsink to run one SSR at full current switching capacity without overheating. Description Specifications Medium and high current (>5A) SSRs can generate a lot of heat during operation. Failure to manage the generation of heat by the SSR during switching may damage the SSR and lead to product failure. When using an SSR this problem of heat dissipation must be managed. It is very important to select an adequate heatsink if you plan on using your SSR at its maximum specifications. To assist with heat dissipation, a thermal pad (packaged with all "hockey puck" type SSRs we sell) should be used between the relay an...
SSR Relay Board 2.5A
Date Added: Wednesday 08 October, 2014
Manufacturer:
  US$17.70


This board has 2 SPDT mechanical relays rated at 240VAC/10A or 100VDC/5A. SSR Relay Board 2.5A This board has 2 SPDT mechanical relays rated at 240VAC/10A or 100VDC/5A. Description Specifications Resources Code Sample Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. By simply providing a small voltage to the control side of the circuit, you can open or close a higher powered circuit on the load side. The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of an LED paired with a set of optically-contr...
Dual Relay Board
  US$22.42
Date Added: Wednesday 08 October, 2014
Manufacturer:


This board has 2 SPDT mechanical relays rated at 240VAC/10A or 100VDC/5A. Dual Relay Board This board has 2 SPDT mechanical relays rated at 240VAC/10A or 100VDC/5A. Description Specifications Resources Code Sample The Dual Relay Board allows you to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs. Note: This board is not suitable for switching signals. It takes at least 100mA of current to bridge the oxide layer that forms on the relay contacts, and most signals will not meet this requirement. If you need to switch signals, check out the 1017 - PhidgetInterfaceKit 0/0/8. Comes Packaged with: 3002 - 60cm Sensor Cable ...
PhidgetInterfaceKit 0/0/8
Date Added: Wednesday 08 October, 2014
Manufacturer:
  US$91.45


Control 8 DPDT mechanical relays, switching up to 250VAC/2A. PhidgetInterfaceKit 0/0/8 Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp. Description Specifications Resources Code Sample The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum of 60 Watts. While typical mechanical relay boards are unable to switch signals due to an oxide buildup on the contacts, the 1017 excels at switching both signals and low-power applications.The 1017_2 can be connected via USB, or to a VINT Hub using a Phidget cable. Please Note: These relays cannot be switched at maximum current and maximum voltage at the same time. Ensure that the total ...
Stepper Mounting Bracket (NEMA 11)
  US$4.43
Date Added: Wednesday 08 October, 2014
Manufacturer:


Fix a NEMA-11 sized motor or 28mm gearbox to a flat surface with this steel mounting bracket. Stepper Mounting Bracket (NEMA 11) Fix a NEMA-11 sized motor or 28mm gearbox to a flat surface with this steel mounting bracket. Description Specifications Resources This coated steel mounting bracket provides a simple means of attaching a NEMA-11 sized stepper motor to a flat surface. It has two sets of mounting holes, so it can be attached to 28mm planetary gearboxes or mounted directly to the motor. It is also compatible with the gearbox end of the following DC motors: . 3261/3261E - 12V/0.2Kg-cm/1080RPM 3.7:1 DC Gear Motor 3262/3262E - 12V/0.9Kg-cm/285RPM 14:1 DC Gear Motor 3263/3263E ...
42STH38 NEMA-17 Bipolar Stepper with 5.18:1 Gearbox
Date Added: Wednesday 08 October, 2014
Manufacturer:
  US$54.87


This bipolar stepper with a rear shaft and a planetary gearbox has a 0.35° step angle and 18 kg·cm of torque at low speeds. 42STH38 NEMA-17 Bipolar Stepper with 5.18:1 Gearbox This bipolar stepper with a rear shaft and a planetary gearbox has a 0.35° step angle and 18 kg·cm of torque at low speeds. Description Specifications Resources Connection This NEMA-17 motor has an integrated Planetary gearbox with a 52/11:1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. When connected to a 1067 - PhidgetStepper Bipolar HC, the 3325 has a maximum speed of approximately 900 RPM. At the output of the gearbox, the step angle is a little under 0.35°. When using the step angle ...
28STH32 NEMA-11 Bipolar Stepper with 27:1 Gearbox
  US$50.15
Date Added: Wednesday 08 October, 2014
Manufacturer:


This compact bipolar stepper with a rear shaft and a planetary gearbox has a 0.067¢X step angle and 14 kg¡Pcm of torque at low speeds. 28STH32 NEMA-11 Bipolar Stepper with 27:1 Gearbox This compact bipolar stepper with a rear shaft and a planetary gearbox has a 0.067° step angle and 14 kg·cm of torque at low speeds. Description Specifications Resources Connection This NEMA-11 motor has an integrated Planetary gearbox with a 26103/121 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler . When connected to a 1067 - PhidgetStepper Bipolar HC, the 3321 has a maximum speed of approximately 120 RPM. At the output of the gearbox, the step angle approximately 0.067°. When using the step a...
28STH32 NEMA-11 Bipolar Gearless Stepper Motor
Date Added: Wednesday 08 October, 2014
Manufacturer:
  US$22.13


This tiny stepper with a rear shaft has a 1.8¢X step angle and 520 g¡Pcm of torque at low speeds. 28STH32 NEMA-11 Bipolar Gearless Stepper Motor This tiny stepper with a rear shaft has a 1.8° step angle and 520 g·cm of torque at low speeds. Description Specifications Resources Connection This NEMA-11 motor generates 600 g-cm of holding torque at 0.67 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler . When connected to a 1067 - PhidgetStepper Bipolar HC, the 3320 has a maximum speed of approximately 426 RPM. ...
NEMA-17 Bipolar 48mm Stepper (0.9¢X Step Angle)
  US$20.36
Date Added: Wednesday 08 October, 2014
Manufacturer:


This precise bipolar stepper has a 0.9° step angle and 4.28 kg¡Pcm of torque at low speeds. NEMA-17 Bipolar 48mm Stepper (0.9° Step Angle) This precise bipolar stepper has a 0.9° step angle and 4.28 kg¡Pcm of torque at low speeds. Description Specifications Resources Connection This motor is a larger NEMA-17 motor that produces a whopping 4800g-cm of holding torque and fine resolution. The motor is also very efficient in converting current into torque and velocity. Motor Properties Motor Type ...
Displaying 100 to 108 (of 188 new products) Result Pages: [<< Prev]  ... 11  12  13  14  15 ...  [Next >>]