Analog Inputs
The Analog Inputs are used to measure continuous quantities, such
as temperature, humidity, position, pressure, etc. Phidgets offers
a wide variety of sensors that can be plugged directly into the 1011's
female cable connector using the cable included with the sensor.
Sampling rates can be set at 1ms, 2ms, 4ms, 8ms and multiple of 8ms
up to 1000ms.
Digital Inputs
The Digital Inputs have a Digital Input Hardware Filter to eliminate
false triggering from electrical noise. They can be used to convey
the state of devices such as push buttons, limit switches, relays,
and logic levels.
Digital Outputs
The Digital Outputs can be used to drive LEDs, solid state relays
(such as the 3052 SSR Relay Board), transistors; in fact, anything
that will accept a CMOS signal
USB Hub
Connecting additional USB devices to the 1019 is as easy as plugging
them into the on-board 6-port hub. Each USB port on the hub has a
maximum current supply of 500mA.
Comes Packaged with:
A Power Supply 12VDC 2.0A ¡V with a US Plug
A 3001 - 180cm USB Cable
A Hardware mounting kit
|
