TchineseEnglish
Your cart contains 0 items
Top » Catalog » Controllers » Motors » Stepper Controllers » 1067_0 » Motor Control [1067_0]
US$88.50

Accurately control one bipolar stepper motor with this controller. This board comes with a number of safety features.

PhidgetStepper Bipolar HC






Accurately control one bipolar stepper motor with this controller. This board comes with a number of safety features.






The 1067ˇVPhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. This is the product you want to use to control larger industrial steppers or for applications that need a lot of torque.

The 1067 can also be used in applications that require very precise positioning. It uses micro-stepping at all times to ensure smooth acceleration.

This board is USB isolated, protecting your system from ground loops, and comes with a built-in replacable ATP Blade Terminal fuse to protect against an over-current scenario.


Previous Versions of the 1067:

The 1067 replaces our previous bipolar stepper controller, the 1063_1 - PhidgetStepper Bipolar 1-Motor. The following features have changed:

-- Increased maximum velocity and acceleration, allowing you to drive your stepper motor even faster
-- Increased available motor current for larger motors
-- Added safety features such as power isolation and a fuse for surge protection
-- Now micro-steps at all speeds for smoother acceleration
-- Removed motor current sensing
-- Removed digital inputs



Related Products:


If you need motors, we do carry a good selection of Bipolar stepper motors.
If you need a replacement fuse, you can buy a 3700 - Fuse Kit.


Comes Packaged with:

  • A 3018 - Mini-USB Cable 180cm

  • A Hardware mounting kit (4 nuts and bolts (M3), 4 plasticspacers)

  • A 5 Amp ATP Blade Terminal fuse


    Recommended Accessories:

    Power Supplies:
    3082ˇVPower Supply 12VDC 5.0A (North American style plug)
    Fuses:
    3700ˇVFuses - 5/10/20/30A 32V



  • Controller Properties

    API Object Name Stepper
    Motor Type Bipolar Stepper
    Number of Motor Ports 1
    Motor Position Resolution 1/16 Step (40-Bit Signed)
    Position Max ± 1E+15 1/16 steps
    Stepper Velocity Resolution 1/16 steps/sec
    Stepper Velocity Max 250000 1/16 steps/sec
    Stepper Acceleration Resolution 1 1/16 steps/sec2
    Stepper Acceleration Min 2 1/16 steps/sec2
    Stepper Acceleration Max 1E+07 1/16 steps/sec2


    Electrical Properties

    Available Current per Coil Max 4 A
    Supply Voltage Min 10 V DC
    Supply Voltage Max 30 V DC
    Current Consumption Min 25 mA
    USB Speed Full Speed


    Physical Properties

    Power Jack 5.5 x 2.1mm Center Positive
    Recommended Wire Size (Motor Terminal) 12 - 26 AWG
    Recommended Wire Size (Power Terminal) 12 - 26 AWG
    Operating Temperature Min -20 °C
    Operating Temperature Max 85 °C


  • User Guide

  • Stepper Motor and Controller Primer

  • Motor Selection Guide

  • Mechanical Drawings

  • Download 3D Step File

  • Programming Resources


  • Enclosure

    We do not carry enclosures for the 1067_0, because motor controllers are prone to overheating when kept in enclosed spaces for extended periods of time with no airflow.

    Previous Versions of the 1067
    The 1067 is based on the 1063_1 - PhidgetStepper Bipolar 1-Motor Board Revision 1


    Warning

    warning Make sure the power supply is unplugged before attaching or removing wires from the terminal blocks. Failure to do so could cause permanent damage to the PhidgetStepper board.

    When using larger motors with heavy loads or high speeds, you should take caution because the back EMF generated when stalling or changing directions could damage the motor controller. As a rule of thumb, if the kinetic energy of your application exceeds 10 joules, you are at risk of damaging the controller. Feel free to contact us for advice for such applications.





    This product was added to our catalog on Thursday 16 October, 2014.
    Reviews
    Customers who bought this product also purchased
    28STH32 NEMA-11 Bipolar Stepper with 27:1 Gearbox
    28STH32 NEMA-11 Bipolar Stepper with 27:1 Gearbox
    FlexiForce Adapter
    FlexiForce Adapter
    8" FlexiForce 0-25lb. Resistive Force Sensor
    8" FlexiForce 0-25lb. Resistive Force Sensor
    PhidgetInterfaceKit 8/8/8
    PhidgetInterfaceKit 8/8/8
    28STH32 NEMA-11 Bipolar Gearless Stepper Motor
    28STH32 NEMA-11 Bipolar Gearless Stepper Motor
    NEMA-17 Bipolar 48mm Stepper (0.9˘X Step Angle)
    NEMA-17 Bipolar 48mm Stepper (0.9˘X Step Angle)
    Sharp Distance Sensor (20-150cm)
    Sharp Distance Sensor (20-150cm)