The USB Isolator is designed to protect your PC
from harmful voltage that can flow from devices attached to your PC
through the USB cable. The isolator is inserted between the Phidgets
board and your PC.
The USB Isolator can also be used to eliminate problems caused by
ground ¡§voltage¡¨ differences between USB Host and USB devices. The
USB Isolator can be very useful for stabilizing systems. Have a look
at the technical information section of the User Guide.
Related Product:
You can use the following cables to connect the 3060 ¡V USB Isolator
to your PC. Use a Mini-USB to connect the 3060 to your PC and use
a Mini-USB or a USB cable to connect your relay, motor controller
or InterfaceKit board to the 3060 depending on the connector on your
board.
3017 - Mini-USB Cable 30cm 24AWG
3018 - Mini-USB Cable 180cm 24AWG
3020 - Mini-USB Cable 450cm 20AWG
3011 ¡V USB Cable 30cm 28AWG
3001 ¡V USB Cable 180cm 28AWG
|
