|
Measures Relative Humidity from 10% to 95% with a typical error of
±2%RH at 55% RH.
Measures Ambient Temperature in the range of -30°C to +80°
C with a typical error of ±0.75°C in the 0°C to 80°C
range.
The temperature sensor component is rated at -40°C to +100°C,
but the other components on the board, the connector and the cable
are rated at -30°C to +80°C. In a fast prototyping environment
the temperature sensor board can be pushed to the ratings of the sensor
component, but you should use the lower temperature ratings if you
plan to use the 1125 in a commercial application.
Comes Packaged with:
3002 - 60cm Sensor Cable
Related Products:
If you need a humidity sensor that is not affected by water immersion,
you should have a look at:
3130 - Relative Humidity Sensor HM1500LF
If you need to measure temperatures outside the -30 to +80C range, you should use one of the following products with the appropriate temperature probe:
1048 - PhidgetTemperatureSensor 4-Input
or
1051 - PhidgetTemperatureSensor 1-Input
Warning
 |
This sensor is intended for
use in non-condensing environments. Allowing the sensor to come
in direct contact with water vapor or condensation could damage
the circuitry. |
|
